Repairs to uPVC Windows

Upvc Window Repair is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they will usually fit into the old frames very easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you are going to attempt to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional is able to repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the distance between the door and the window is large, you might want to use an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may be affected by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. It is crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll have to open the window to get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for an appropriate fit. If you're satisfied with the fit, tighten the screws until they remain in place.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Most often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if you wake up every morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the problem the old caulking may need to be removed before a new layer of caulk can be put on. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze it could be the hinges that are at the fault. These are easily repaired by any skilled DIYer and can usually be done within a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is essentially a simple process but it can be easier to do when you have a person to help you hold the frame up.

Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by improper installation in the factory. Sending us a picture via our website will often solve the issue. We are always happy to offer assistance.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges can also become unbalanced due to wear, which can cause gaps between the frame and sash. This can be easily repaired by giving them thorough clean, however if they are beyond repair it could be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window, may be misaligned. Again, it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the possibility of draughts.

One of the most effective ways to reduce drafts is to use a draught excluder, these are typically made of fabric filled with some kind of filler. They can be put on the windowsill on top. They can keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it may be cheaper to replace them than to repair them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as possible.