Door Handle Replacement

Door handles may seem like something minor however, if you don't like the appearance of the handles or are unable to use them, it's worth replacing them. With a bit of patience, you can put in the new handle in no time.

Modern door handles are often equipped with cover plates that hide the screws, giving them an attractive appearance. However, you will need to attach them separately if your new handle does not have them attached already.

Removal of the Old Handle

The door handle isn't just a decorative feature for your home, but it's also an important safety feature that lets you to lock and unlock the door. As time passes the door handle for patio door could begin to lose its grip or feel a bit loose. It might also appear worn out and old. This is an indication that it's time for a replacement.

One of the first indications that your sliding door handles handle needs replacing is the fact that it is becoming difficult to operate. This is a serious issue because you won't be able to lock or unlock the door, which could put you and your family at risk.

Another reason to replace your door handle is if it's damaged or broken. A damaged or broken door double glazing handle is dangerous, particularly for children and elderly family members who struggle to open it. They may get trapped. It's a good thing that it's simple to fix a damaged door handle by simply replacing the old one.

The majority of modern door handles are standard size and therefore will fit on any door. If you aren't sure if your new door handle will work, remove the old one and take measurements of its holes in the housing. This will help you to buy the right door handle.

The easiest method to take off your old door handle is to take it off of the door. Usually, a screwdriver is used. However certain door handles come with a cover plate that conceals the mounting screws, so you'll need to pry off this to reach the screws beneath. After you have removed the handle that was previously used, take note of the way the spindle is attached. This will assist you in aligning the new handle.

Alternately, you can take off your door handle by unscrewing it from the latch mechanism. This is usually done with the screwdriver, but you'll need to find the small latch, which should be just to the left of the trim piece. After you have removed the latch, [Redirect-307] take off the handle and the strike plate. Then remove the latch from the edge of the door.

The Strike Plate

When you replace your handle, you'll need to replace the latch plate, which is the hole which the door's latch hooks into when it closes. The new handles will have two latch plates that are circular and rectangular plate (see the diagram above which shows the various parts of a door handle). If you have an rectangular latch plate, replace it with an oval one. This will allow the latch to hook onto the strike plate, making the handle easier.

The first step is to unscrew the screw that's holding the old latch plate in place. The screws are typically tight and require a fair amount of force to loosen them. If you can, it might be beneficial to have a second person assist you with this task.

After the screws are removed the latch should slide out of the door with ease. If it's stuck or won't move, use a small nail file to scrape around the edges of the latch plate. This will sometimes free the plate.

Now, you can proceed to creating the new door strike plate to be installed. With the screws made of wood that came with your new handles for double glazed doors, attach the latch plate onto the inside of the doorjamb. Do not overtighten your screws as this can cause damage to the strike plate.

If you're unsure whether the latch plate is in the proper position, close and open the door to determine whether it locks and closes properly. If not you'll need to adjust the strike plate either up or down, or forward or back, until the door closes and latches properly.

If the door is still moving or 10-day.net jiggling, it may be necessary to expand the hole for latching in the strike plate. This is more prevalent for older doors, but can happen due to wear and tear, hinge mortises that are too narrow or are not sized correctly for the latch, or because of damaged or broken strike plate. If this is the case, follow the same procedure as adjusting the strike plate, but using a metal file instead of a chisel and hammer.

Removal of the Latch

The latch is the angled metal piece that moves in and out of the hole that runs along the inside edge of your door. The latch moves forward when you turn the handle. It also hooks in the door frame to ensure that the door stays closed. If your door shakes when you close it, an upgrade to the latch could be all that is needed to fix the issue.

It's difficult to see the screws that secure the latch to the door, but there's usually a small slot on the trim plate that allows you to insert a screwdriver into the slot and take it off. After you've removed your trim plate, it should be simple to take off the latch and the bolts that keep the latch and spindle in the position.

If the latch isn't easily removed then use a paperclip tool to take it off the handle mechanism. Insert the item into the recessed latch slot and gently turn or jiggle it until you feel the handle and latch begin to separate. You may need to repeat this procedure several times before you are able to take the latch off.

After the old latch has been removed and the old latch is removed, you should be able to move the new latch into the slot without problems. Make use of the new screws to secure the latch to the strike plate or door frame. Make sure it is correctly positioned in the slot, and aligned with the screw chambers.

Before installing the new handle, make certain to measure your existing backset (the distance from the centre of the large hole on the front surface of the door to the edge). Make sure that the size of the latch of the new handle is in line with the measurement.

If you're replacing the handle or latch or handle, or if your previous lock cylinder is damaged then you will need a new one. If you're not changing locks however, a new latch should fit in your existing recess, and be compatible with your current keys. Be sure to choose an entry point with rectangular cover plates that match your handles.

Remove the cover plate

You can replace window handle your door handles with a contemporary rose and lever designs to make a difference in the appearance of your home. You can buy complete sets of door handles that come with matching escutcheons and privacy adaptor kits.

To replace the door handle inside remove the cover plate (or rose) that covers the screws and mechanism. Find a release tab on the plate, and make use of a flathead screwdriver to pop it off the knob. It could have an opening on one side or be held by a pin.

Remove the screw holding the interior handle and set it aside once the cover plate has been removed. Take off the screws that hold both the inner and outer plates. You can loosen them with the help of a Philips Screwdriver. Remove the plates that hold the inner plate and latch from the door. Place them aside.

Some doors don't have this gap. If it doesn't, you'll need to drill a hole in the door to accommodate the new handle. The procedure to do this is the same as opening a door using a lock, but you'll need to take extra care to avoid damaging the frame or door.

The installation of new door knob screws is required after the holes have been made. Choose the same size as your old screws to ensure that you don't get a handle that is too loose or tight. You'll also have to install a new latch plate and strike rod that aren't included in the majority of door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are an excellent choice if you're in the market of a high-quality interior door handle replacement set. It's a factory-fit and has received hundreds of five-star reviews from delighted customers. It's an excellent option to replace worn or damaged interior door hardware on your Chevy.